HYJ-800-type H-beam flange straightening machine, the main drive motor and the use of force, Shandong China Changzhou Guomao Cathay Pacific cycloid reducer drive, drive efficiency, speed correction, the correction of all are taken for high quality alloy roller steel production, and through advanced heat treatment process, to avoid cracking of the parts prone to defects, in order to ensure its stability and long-term correction of the life of all its parts are made to enhance processing, host-controlled operation with nearly boxes, convenient operation. 

 2 Specifications 

 l flange width: 200-800 mm 

 l flange thickness: 6-40 mm 

 Note: H-beam flange thickness and width shall comply with the table, made of Q235A 

 S 
 25 
 25 ~ 30 
 30 ~ 35 
 35 ~ 40 

 B 
 200 800 
 350 800 
 500 ~ 800 
 600 800 


 l correct speed: ≈ 18000 mm / min 

 l Main motor power: 22 Kw 

 l Lift motor power: 1.1kw × 2 

 l Power Supply: AC 380V 50Hz 3 phase 

 3 Scope and composition of the unit 

 a. straightening machine host with: base, left and right body frame, motor, reducer, corrective wheel, roller, guide roller, etc. 

 b. conveying roller with: roller conveyor is 3.5 m / section × 4 节 

 c. electronic control assembly including: electrical control boxes, boxes and accessories operating 

 d. spare parts including: a special wrench, push button switch 2. 

 4 technical documentation (issued after the commencement of the contract user) 

 a. manual (with electrical schematics, wearing parts diagram, etc.) 

 b. invoice 

 c. machine certificate 

 d. machine base map 



 HYJ-600 Straightening Machine 

 A structural principle 

 After forming the H-beam welding (beam), due to thermal expansion and contraction of the role, the flange will inevitably produce bending, HYJ-600 hydraulic straightening machine is used to correct the deformation of special equipment. The machine is simple, fast, high efficiency, can be widely used in large buildings, water bridges, metallurgical industry and other metal structure industry. 

 2 Specifications 

 l flange width 150-600mm 

 l S ≤ 20mm flange thickness 

 l correct speed: ≈ 8500 mm / min 

 l walking motor power: 5.5Kw 

 l Lift motor power: 0.55 × 2kw 

 l Power Consumption: 7kw 

 Material is Q235-A, its width and thickness must meet the following table corresponding to the relationship: (mm) 

 S 
 10 
 10 ~ 15 
 15 ~ 20 

 B 
 200 600 
 250 600 
 350 600 


 3 Scope and composition of the unit 

 a. straightening machine host with: base, left and right body frame, motor, reducer, corrective wheel, roller, guide roller, etc. 

 b. Input and output roller assembly including: transport roller 3 m / section × 4 节 

 c. electronic control assembly including: electrical control boxes, boxes and accessories operating 

 d. Spare parts including: button switch 2.